Secabo TC7 LITE Energy Saver Modular Transfer Press 40cm x 50cm

Overview: Secabo TC7 LITE Energy Saver Modular Transfer Press 40cm x 50cm

The ultimate upgrade in energy efficiency and transfer convenienceIncrease energy efficiency and revolutionize your operation with the Secabo TC7 LITE Energy Saver. Equipped with Secabo's groundbreaking Energy Saver HP5 heating plate, this heat press presents an unprecedented fusion of technology and sustainability.Optimal energy efficiency meets elite performance:The integrated HP5 ES heating plate impresses with its additional insulation that significantly reduces standby energy consumption, promising savings of up to 80%. When in action, this hot plate is designed to operate more than 30% more efficiently, not only providing you with remarkable energy savings, but also helping to minimize your operation's carbon footprint.User-centric safety and ease of use:Thanks to the specially designed cover, your workers are protected from potential burns while further reducing energy consumption. At the same time, operating the hot plate without the cover is as easy as can be. A hand wheel allows you to precisely adjust the contact pressure, so you can get started in no time.Maximum cost efficiency for your business:Imagine saving up to 374 EUR in energy costs annually just by using the Secabo TC7 LITE Energy Saver for an 8-hour workday and an electricity price of 0.4 EUR/kWh. It is not only an impressive cost saving, but also a step towards a more environmentally friendly operation.The Secabo TC7 LITE Energy Saver represents the future of transfer press technology. It combines top-notch performance, energy efficiency and ease of use in one impressive package. It's time to take the next step and optimize your operation with Secabo's revolutionary technology. Discover the myriad benefits and increase the efficiency and sustainability of your operation.Eco-Friendly Design:Conserve resources through sustainable design and minimized energy consumption to reduce your environmental footprint.Optimized Energy Management:Intelligent energy management ensures lower consumption and minimal heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and take advantage of potential savings.Longer life:Reduced energy consumption ensures less wear and tear, resulting in extended equipment life.Cost savings:The cost-effectiveness of energy savings contributes to faster payback of initial costs.Increased productivity:More efficient energy management enables longer uptime, increasing productivity.Lower CO2 emissions:By using energy-efficient technologies, CO2 emissions are significantly reduced, helping to protect the environment.Improved heat transfer:Optimized energy efficiency provides more consistent and precise heat transfer for transfer presses.Smart energy features:Innovative technologies such as automatic shutdown and sleep mode during inactivity further save energy.Features:Transfer press opens automatically after time has elapsedDigital controller for temperature and time Temperature (max. 250°C) and time can be set on the controller using arrow keysModular design, components can be easily exchangedUpgrade to Secabo SMART version possible at any timeEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even more productivity.

Energy efficiency meets high-end technology

Our innovative Energy Saver models are the result of extensive research and development and offer impressive energy savings. The specially designed insulation significantly reduces energy consumption in standby mode, lowering operating costs while reducing the carbon footprint of your operation. But the benefits go beyond energy savings. The unique design also provides more even heat distribution, resulting in more precise and consistent results with every print.

Intelligent display functions and intuitive control concept

Our LITE models are equipped with electronics developed based on Secabo's extensive industry know-how. The digital controller for temperature and time allows you to make the desired settings easily and quickly. And of course you can switch between C° and F°. The control concept has been deliberately kept simple to enable the user to handle the press even more effectively.

A basic product with great upgrade options

With the Secabo LITE version, you have numerous options to create your own ideal work tool. Due to the modular design, our LITE models can also be converted to the SMART model. In addition, you can also upgrade with the passive membrane bottom plate. The membrane can be easily inflated via a small blower ball. This allows you to determine the maximum compensation height of the membrane for a transfer. The contact pressure is set as usual on the transfer press, for example via a handwheel on the heating plate. The possibilities are therefore diverse and easy to implement individually according to your needs with the LITE version.


Technical Data

Dimensions open 43cm x 93cm x 74cm
Dimensions closed 43cm x 57cm x 75cm
working area 40cm x 50cm
scope of delivery Mechanical base, heating plate and base plate, LITE controller box, C13 IEC power cord, tools, operating instructions
pressure setting the heating plate can be adjusted with a hand reel
max. downforce 250 g/cm²
max temperature 250 °C
maximum time preset 999 s
max. clam angle 40 °
power supply AC voltage 230V / 50Hz - 60Hz, 1.8kW
environment +5°C - +35°C / 30% - 70% humidity
Options Quick-change system, various interchangeable plates, slide extension, membrane base plate, TB7 Thermobase
weight without packaging 39 kg
weight with package 50,60 kg
Brand Secabo

Views


applications for heat presses

designing like the pros - using heat transfer presses

What is a heat press?

A heat press, transfers text, logos or images onto different materials. The device works with pressure as well as heat in order to achieve long-lasting results. A heat press is like a large iron, but with more pressure and more intensive heat. Heat presses are suited for a wide range of transfer processes.


finishing of garments with flock and flex

motives from flock or flex material or decals can be transferred to garments with the heat press. E.g. soccer jerzys can be decorated with names, numbers or the club's logo

sublimation transfer:

In this process, the heat press transfers graphics, photos and texts that have been printed on a commercially available printer to polyester materials. Printing requires nothing more than special sublimation inks. The heat created by the heat press causes the ink to dye polyester materials. In addition to clothing, this procedure is also suitable for individually designing cups, puzzles, mouse pads, tableware and much more. Please note that this procedure should only be used on bright, preferably white materials, to facilitate a realistic color reproduction.

Inkjet flex:

A design is cut out of an inkjet flex foil and then transferred to a piece of clothing using a heat press. The highlight: Regular ink from a normal printer is preserved by special varnish beads inside the inkjet flex foil through the transfer process. This facilitates the production of durable textile finishes in photo quality with simplest means. One might, for example, design a soccer fan shirt with a country pennant.such as a country pennant on a soccer fan shirt, etc.

Chromablast Transfer:

A design is cut out of an inkjet flex foil and then transferred to a piece of clothing using a heat press. The highlight: Regular ink from a normal printer is preserved by special varnish beads inside the inkjet flex foil through the transfer process. This facilitates the production of durable textile finishes in photo quality with simplest means. One might, for example, design a soccer fan shirt with a country pennant.such as a country pennant on a soccer fan shirt, etc.

Why do I need a heat press?

The uses and possibilities of a heat press are as diverse as the various different transfer methods that exist. Heat presses allow both professionals and ambitious hobbyists to make their personal design ideas a reality, such as for example:

Creative design of cups and mugs
Individual design of mouse pads
Processing and design of clothing such as T-shirts, jackets or sweaters, for example, for bands, schools, work clothes, designer collections
durable garment decoration with motives from flock or flex - ideal for sport clubs
Creation of personal Hat
Design your own towels and bathroom textiles
Creative design of large-scale photo motifs on bathroom or kitchen tiles
create your individual bags

Which is the right heat press for my projects?

When choosing the appropriate heat press, the shape of the receiving material and the size of the objects to be transferred are key factors. Folding presses or swing presses are used to finish flat materials, such as textiles or tiles, with a personalized design. The Secabo TC 2 heat press, for example, is a reliable entry-level folding press for smaller designs. The Secabo TC 5 heat press is suitable for larger designs. There are special mug presses that perfectly adapt to the shape of a mug to allow for creating an individualized mug collection, such as the Secabo TMUG heat press.


Accessories

Antistatic hotplate protector, self-adhesive, with PTFE coating 40 x 50cm

Antistatic hotplate protector, self-adhesive, with PTFE coating 40 x 50cm

Self-adhesive fiberglass film with PTFE coating. As a replacement for damaged or worn non-stick...

more

Antistatic protective film for transfers made of PTFE, 50cm x 60cm

Antistatic protective film for transfers made of PTFE, 50cm x 60cm

Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or...

more

Cover for base plate, 40cm x 50cm

Cover for base plate, 40cm x 50cm

Cover for a heat press base plate with dimensions of 40 x 50cm. Heat-resistant up to 220°C....

more

Secabo quick release plate changer for LITE and SMART series

Secabo quick release plate changer for LITE and SMART series

With the Secabo quick-change system, up to three exchange plates can be mounted next to each...

more

exchangeable base plate for secabo heat presses, 12cm x 38cm

exchangeable base plate for secabo heat presses, 12cm x 38cm

Removable plate for Secabo transfer presses 12cmx38cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...

more

exchangeable base plate for secabo heat presses, 20cm x 30cm

exchangeable base plate for secabo heat presses, 20cm x 30cm

Removable plate for Secabo transfer presses 20cmx30cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...

more

exchangeable base plate for secabo heat presses, 15cm x 15cm

exchangeable base plate for secabo heat presses, 15cm x 15cm

Removable plate for Secabo transfer presses 15cmx15cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...

more

exchangeable base plate for secabo heat presses, 8cm x 12cm

exchangeable base plate for secabo heat presses, 8cm x 12cm

Removable plate for Secabo transfer presses 8cmx12cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...

more

mounting kit for exchangeable base plates

mounting kit for exchangeable base plates

Mounting kit for directly mounting a Secabo removable plate to the base of a Secabo heat press....

more

Secabo Slide extension for LITE and SMART series

Secabo Slide extension for LITE and SMART series

The Secabo LITE and SMART series can now be converted into a convenient double-plate transfer...

more

Membrane base plate 47cm x 57cm for TC7, TC7 SMART / LITE, TPD7 / TPD7 PREMIUM, TS7 swingaway / TS7 SMART

Membrane base plate 47cm x 57cm for TC7, TC7 SMART / LITE, TPD7 / TPD7 PREMIUM, TS7 swingaway / TS7 SMART

The membrane base plates by Secabo create new opportunities in the implementation of your Secabo...

more

Silicon Mat 40cm x 50cm

Silicon Mat 40cm x 50cm

Heat-resistant silicone pad, to compensate for irregularities (eg. tiles) for to protect...

more


Downloads

data sheet - Secabo TC7 LITE Energy Saver Modular Transfer Press 40cm x 50cm

download