Clam Presses

The ultimate upgrade in energy efficiency and transfer convenienceIncrease energy efficiency and revolutionise your operation with the Secabo TC7 LITE Energy Saver. Equipped with Secabo's ground-breaking Energy Saver HP5 heating plate, this Heat Press presents an unprecedented fusion of technology and sustainability.Optimum energy efficiency meets elite performance:The integrated HP5 ES heating plate impresses with its additional insulation, which significantly reduces standby energy consumption, and promises savings of up to 80%. When in action, this heating plate is designed to operate more than 30% more efficiently, which not only brings you remarkable energy savings, but also helps to minimise the environmental footprint of your operation.User-centred safety and ease of use:Thanks to the specially designed cover, your employees are protected from potential burns while further reducing energy consumption. Operating the heating plate without the cover is extremely easy. A handwheel allows you to precisely adjust the contact pressure so you can get started in no time.Maximum cost efficiency for your business:Imagine if you could save up to EUR 374 a year in energy costs just by using the Secabo TC7 LITE Energy Saver for an 8-hour working day and an electricity price of EUR 0.4/kWh. It is not only an impressive cost saving, but also a step towards a more environmentally friendly operation.The Secabo TC7 LITE Energy Saver represents the future of Heat Press technology. It combines first-class performance, energy efficiency and ease of use in one impressive package. It's time to take the next step and optimise your operation with Secabo's revolutionary technology. Discover the countless benefits and increase the efficiency and sustainability of your operation.Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore a longer appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode during inactivity save additional energy.Features:Heat Press opens automatically after the time has elapsedDigital controller for temperature and time Temperature (max. 250°C) and time can be set on the controller using arrow keysModular design, components can be easily exchangedUpgrade to the Secabo SMART version possible at any timeEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer methodsCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

The ultimate upgrade in energy efficiency and transfer convenienceIncrease energy efficiency and revolutionise your operation with the Secabo TC5 LITE Energy Saver. Equipped with Secabo's ground-breaking Energy Saver HP5 heating plate, this Heat Press presents an unprecedented fusion of technology and sustainability.Optimum energy efficiency meets elite performance:The integrated HP5 ES heating plate impresses with its additional insulation, which significantly reduces standby energy consumption, and promises savings of up to 80%. When in action, this heating plate is designed to operate more than 30% more efficiently, which not only brings you remarkable energy savings, but also helps to minimise the environmental footprint of your operation.User-centred safety and ease of use:Thanks to the specially designed cover, your employees are protected from potential burns while further reducing energy consumption. Operating the heating plate without the cover is extremely easy. A handwheel allows you to precisely adjust the contact pressure so you can get started in no time.Maximum cost efficiency for your business:Imagine if you could save up to EUR 374 a year in energy costs just by using the Secabo TC5 LITE Energy Saver for an 8-hour working day and an electricity price of EUR 0.4/kWh. It is not only an impressive cost saving, but also a step towards a more environmentally friendly operation.The Secabo TC5 LITE Energy Saver represents the future of Heat Press technology. It combines first-class performance, energy efficiency and ease of use in one impressive package. It's time to take the next step and optimise your operation with Secabo's revolutionary technology. Discover the countless benefits and increase the efficiency and sustainability of your operation.Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore a longer appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode during inactivity save additional energy.Features:Heat Press opens automatically after the time has elapsedDigital controller for temperature and time Temperature (max. 250°C) and time can be set on the controller using arrow keysModular design, components can be easily exchangedUpgrade to the Secabo SMART version possible at any timeEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer methodsCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

Top performance and high convenience with the Secabo LITE series - With this new development of the successful Secabo TC5 toggle press, Secabo is launching a lucrative modular system on the market that opens up a wide range of new possibilities for users. Added flexibility thanks to easily interchangeable components - in short, a basic product with great upgrade options. The new LITE models therefore have the advantage of being able to retrofit individual base plates or heating platens at low cost and easily replace components as required. The TC5 LITE Heat Press from Secabo is a modular, automatically opening toggle press. The user does not have to wait next to the press during transfers, but can carry out other activities. Once the set time has elapsed, the press opens automatically and announces this three seconds in advance with an acoustic signal. The pressing process can be interrupted at any time at the touch of a button - for example to pre-press textiles. The temperature and pressing time are conveniently preselected using a digital controller. The contact pressure is set using a large handwheel on the top of the heating plate. The TC5 LITE Heat Press, with a working surface of 38cm x 38cm, has an additional cover plate on the heating plate to protect the user from burns. The design of the TC5 LITE is fully modular; the control unit, heating plate, base plate and base frame can be removed and replaced in a few simple steps. This also allows the use of other heating plates, for example. The LITE Heat Presses offer everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, inkjet flex, etc. are of course possible. The Secabo TC5 LITE can be optionally equipped with interchangeable plates in various formats - including a membrane base plate, a quick-change system and a slide extension for use as a double plate press. You also have the option of upgrading the TC5 LITE to our Secabo TC-SMART series.

The revolution in Heat Press technologyIntegrate sustainability and efficiency directly into your business with the new Secabo TC5 SMART Energy Saver. This advanced system combines state-of-the-art technology with an energy-efficient platform to give you a first-class transfer experience.Energy saving redefined:The integrated Energy Saver HP5 heating plate is at the heart of this ground-breaking development. With additional insulation, this heating plate significantly reduces energy consumption in standby mode. And the specially developed cover not only ensures safety and protection against burns, but also further energy savings. It's not just a question of cost, but also of the environment, with potential savings of up to EUR 374 per year and a significantly reduced carbon footprint.Flexibility and adaptability:Thanks to its modular design and quick-change system, the TC5 SMART Energy Saver is ideal for companies that require adaptability and scalability. The Secabo TC5 SMART Energy Saver is more than just a Heat Press. It is a complete solution that combines energy efficiency, state-of-the-art technology and first-class performance. Discover the numerous benefits and possibilities to optimise your operation. Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore an extended appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode when inactive save additional energy.Features:Bluetooth interface for Secabo Smart Transfer app with its own transfer database and numerous additional featuresDigital controller for temperature, time, pre-pressing, counting function and many other features100% new design and new electronics incl. display and control conceptHeat Press opens automatically after the time has elapsedEasily adjustable contact pressureAdjustable force for opening and closing the pressHeating plate with additional protective plateModular design, compact dimensions, lightweight packagesSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

With the C5 Clam, Secabo has the right Heat Press for getting started with textile finishing and other transfer techniques. The Clam Press can be used for all common heat transfer processes (flock, flex, sublimation, etc.). The digital controller for temperature and time allows the required settings to be made quickly and easily. The pressure is adjusted using a handy handwheel. The Secabo C5 Clam has a work surface of 38cm x 38cm.Inexpensive Heat Press for beginnersLarge work surface of 38cm x 38cmDigital controller for temperature and timeEasily adjustable contact pressure

The TC1 Heat Press from Secabo has a working area of 15 x 15 cm. This makes it perfect for textile finishing, e.g. for emblems, patches, iron-on transfers, branding or product labelling. The TC1 is lightweight and very compact, making it ideal for mobile use at events. Our "little one" is also a favourable entry-level model. The TC1 masters transfers on areas that are difficult to access, it presses specifically where it is desired and necessary. Above all, this prevents resublimation and dye migration. The plate heats up quickly and has a low energy consumption. As you would expect from Secabo, the TC1 is easy to operate, even for beginners. The large opening angle makes it easy to prepare the transfer objects on the base plate. The time and temperature for the transfer can be precisely preselected on the digital controller. The contact pressure is set using the handwheel. Closing the pressing lever starts the pressing process.

With the TC2, Secabo has the right Heat Press for getting started in textile finishing and other transfer techniques. The time and temperature of the transfer can be preselected on the digital controller of the Secabo TC2. Once the set time has elapsed, an acoustic signal sounds. The contact pressure is set using a handwheel on the top of the heating plate. The pressing process is started by closing the pressing lever. The large opening angle allows convenient preparation of the transfer objects on the base plate. The TC2 has a working surface of 23cm x 33cm and a heating plate with a power consumption of 1,000W.

Secabo's new TC5 SMART Heat Press opens up innovative ways to achieve even better performance. This new development of the successful Secabo TC5 automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC5 SMART is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled while simultaneously accessing a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC5 SMART Heat Press offers a working area of 38 cm x 38 cm, is easy to operate and robust during operation. The modular design allows quick and easy installation of interchangeable plates in various formats, quick-change system and slide extension.

This new development of the successful Secabo TC5 MEMBRAN automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC5 SMART MEMBRAN is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled with simultaneous access to a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC5 SMART MEMBRAN Heat Press offers a work surface of 38 cm x 38 cm, is easy to operate and robust during operation. The base plate of the Heat Press has a passive membrane. It opens up many new application possibilities - especially for transfer objects with large differences in height and unevenness. The membrane can be easily inflated using a small blower ball. This allows the user to determine the maximum levelling height of the membrane for a transfer. The contact pressure can be adjusted using a large handwheel at the top of the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, additional fine adjustment is possible via the blower ball and a release valve. With the TC5 SMART MEMBRAN, not only can the actual transfer pressure be read off, but it can also be set reproducibly time and time again. The modular design allows quick and easy installation of exchangeable plates in various formats, quick-change system and slide extension. A conventional base plate is included in the scope of delivery alongside the membrane plate.

Secabo's new TC7 SMART Heat Press opens up innovative ways to achieve even better performance. This new development of the successful Secabo TC7 automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC7 SMART is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled while simultaneously accessing a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC7 SMART Heat Press offers a working area of 40 cm x 50 cm, is easy to operate and robust during operation. The modular design allows quick and easy installation of interchangeable plates in various formats, quick-change system and slide extension.

This new development of the successful Secabo TC7 MEMBRAN automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC7 SMART MEMBRAN is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled with simultaneous access to a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC7 SMART MEMBRAN Heat Press offers a work surface of 40 cm x 50 cm, is easy to operate and robust during operation. The base plate of the Heat Press has a passive membrane. It opens up many new application possibilities - especially for transfer objects with large differences in height and unevenness. The membrane can be easily inflated using a small blower ball. This allows the user to determine the maximum levelling height of the membrane for a transfer. The contact pressure can be adjusted using a large handwheel at the top of the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, additional fine adjustment is possible via the blower ball and a release valve. With the TC7 SMART MEMBRAN, not only can the actual transfer pressure be read off, but it can also be repeatedly and reproducibly adjusted. The modular design allows quick and easy installation of exchangeable plates in various formats, quick-change system and slide extension. A conventional base plate is included in the scope of delivery alongside the membrane plate.

Best performance and high convenience with the Secabo LITE series - With this new development of the successful Secabo TC7 toggle press, Secabo is launching a lucrative modular system on the market that opens up a wide range of new possibilities for users. A plus in flexibility thanks to easily interchangeable components, in short a basic product with great upgrade options. The new LITE models therefore have the advantage of being able to retrofit individual base plates or heating platens at low cost and easily replace components as required. The TC7 LITE Heat Press from Secabo is a modular, automatically opening toggle press. The user does not have to wait next to the press during transfers, but can carry out other activities. Once the set time has elapsed, the press opens automatically and announces this three seconds in advance with an acoustic signal. The pressing process can be interrupted at any time at the touch of a button - for example to pre-press textiles. The temperature and pressing time are conveniently preselected using a digital controller. The contact pressure is set using a large handwheel on the top of the heating plate. The TC7 LITE Heat Press, with a working surface of 40cm x 50cm, has an additional cover plate on the heating plate to protect the user from burns. The design of the TC7 LITE is fully modular; the control unit, heating plate, base plate and base frame can be removed and replaced in a few simple steps. This also allows the use of other heating plates, for example. The LITE Heat Presses offer everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, inkjet flex, etc. are of course possible. The Secabo TC7 LITE can be optionally equipped with interchangeable plates in various formats - including a membrane base plate, a quick-change system and a slide extension for use as a double plate press. You also have the option of upgrading the TC7 LITE to our Secabo TC-SMART series.

The revolution in Heat Press technologyIntegrate sustainability and efficiency directly into your business with the new Secabo TC7 SMART Energy Saver. This advanced system combines state-of-the-art technology with an energy-efficient platform to give you a first-class transfer experience.Performance and convenience in one:With its 40cm x 50cm work surface, the TC7 SMART Energy Saver modular Heat Press offers the best of the proven Secabo SMART series. But the revolution doesn't stop there. With an integrated Bluetooth interface and the free Secabo app, the press enables intuitive control and access to an extensive function database. Simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure are immediately available. Additional functions, such as the calculation of heat-up times and warning messages, optimise your work process.Energy saving redefined:The integrated Energy Saver HP5 heating plate is at the heart of this ground-breaking development. With additional insulation, this heating plate significantly reduces energy consumption in standby mode. And the specially developed cover not only ensures safety and protection against burns, but also further energy savings. It's not just a question of cost, but also of the environment, with potential savings of up to EUR 374 per year and a significantly reduced carbon footprint.Flexibility and adaptability:Thanks to its modular design and quick-change system, the TC7 SMART Energy Saver is ideal for companies that require adaptability and scalability. The Secabo TC7 SMART Energy Saver is more than just a Heat Press. It is a complete solution that combines energy efficiency, state-of-the-art technology and first-class performance. Discover the numerous benefits and possibilities to optimise your operation. Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore a longer appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode during inactivity save additional energy.Features:Bluetooth interface for Secabo Smart Transfer app with its own transfer database and numerous additional featuresDigital controller for temperature, time, pre-pressing, counting function and many other features100% new design and new electronics incl. display and control conceptHeat Press opens automatically after the time has elapsedEasily adjustable contact pressureAdjustable force for opening and closing the pressHeating plate with additional protective plateModular design, compact dimensions, lightweight packagesSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.