Accessories for Heat Presses
Heat Presses can be perfectly complemented and expanded with our accessories. For flexible adaptation to different transfer objects, Secabo offers exchangeable plates and quick-change systems that make it easier to replace plates. There are also various heating elements for Mug Presses, cap elements and individual modules. To protect the heating plates and textiles, we offer various protective films and covers. With our cross lasers, you can precisely position your transfer objects on the base plate of the press.
Secabo HeatPlate Cover Holder HP5
Put an end to slipping protective foils and save valuable time with every single pressing process! The Secabo HeatPlate Cover Holder is the must-have upgrade for your Secabo Heat Press. The constant manual positioning and alignment of the non-stick foil before each print not only costs nerves, but also a lot of time in day-to-day production. With this smart holder, the PTFE film (Teflon film) is fixed permanently, smoothly and securely directly to the heating plate.Once fitted, the film stays exactly where it belongs. This allows you to concentrate fully on positioning your textiles and transfers - for a smooth, efficient workflow.The advantages at a glance:Maximum efficiency: No more tedious insertion and alignment of the film for each individual pressing process. Apply the textile, press, done!Optimum protection for the heating plate: The permanently installed PTFE film reliably protects your expensive heating plate from scratches, dirt, toner or adhesive residues.Gentle on textiles & transfers: Prevents transfers from sticking to the heating plate and protects sensitive textiles from direct contact with the metal - for flawless printing results every time.Perfect fit: The holder stretches the film over the heating plate without creases, guaranteeing even heat distribution without unwanted marks.Simple installation: The system can be attached to your existing Secabo press in no time at all and easily removed again if required (e.g. to replace the film).Compatibility: The HeatPlate Cover Holder for HP5 is universally suitable for all Secabo Heat Presses with heating plates measuring 38 cm x 38 cm
Secabo HeatPlate Cover Holder HP7
Put an end to slipping protective foils and save valuable time with every single pressing process! The Secabo HeatPlate Cover Holder is the must-have upgrade for your Secabo Heat Press. The constant manual positioning and alignment of the non-stick foil before each print not only costs nerves, but also a lot of time in day-to-day production. With this smart holder, the PTFE film (Teflon film) is fixed permanently, smoothly and securely directly to the heating plate.Once fitted, the film stays exactly where it belongs. This allows you to concentrate fully on positioning your textiles and transfers - for a smooth, efficient workflow.The advantages at a glance:Maximum efficiency: No more tedious insertion and alignment of the film for each individual pressing process. Apply the textile, press, done!Optimum protection for the heating plate: The permanently installed PTFE film reliably protects your expensive heating plate from scratches, dirt, toner or adhesive residues.Gentle on textiles & transfers: Prevents transfers from sticking to the heating plate and protects sensitive textiles from direct contact with the metal - for flawless printing results every time.Perfect fit: The holder stretches the film over the heating plate without creases, guaranteeing even heat distribution without unwanted marks.Simple installation: The system can be attached to your existing Secabo press in no time at all and easily removed again if required (e.g. to replace the film).Compatibility: The HeatPlate Cover Holder for HP7 is universally suitable for all Secabo Heat Presses with heating plates measuring 40 cm x 50 cm
Secabo TC Base
Secabo TC base frame for Secabo Heat Presses TC5 LITE, TC5 SMART, TC7 LITE, TC7 SMART.
Secabo CL01
Secabo CL01- TC5 Lite, TC7 Lite, TS5 Lite
Secabo HPC01 and base TC5 SMART and TC7 SMART
Set consisting of Secabo HPC01 controller and the mechanical base for TC5 SMART and TC7 SMART.
Secabo HP5 heating plate and base plate 38cm x 38cm
Set consisting of heating plate and base plate ready for connection to TC5 SMART.
Secabo HP7 heating plate and base plate 40cm x 50cm
Set consisting of heating plate and base plate ready for connection to TC7 SMART.
Secabo TS7 SMART base
Secabo TS7 SMART base
Secabo TS7 SMART Manual head
Set consisting of HPC01 controller and TS7 SMART manual head.
Base element for Secabo and TCC SMART TCC 7.0cm x 16.5cm
Interchangeable base element for the Secabo TCC and TCC SMART cap press. With the base elements in different sizes, even particularly small or particularly large caps and hats can be processed perfectly in the press.
Base element for Secabo TCC and TCC SMART 7.6cm x 14.6cm
Interchangeable base element for the Secabo TCC and TCC SMART cap press. With the base elements in different sizes, even particularly small or particularly large caps and hats can be processed perfectly in the press.
Base element for Secabo TCC and TCC SMART 10.2cm x 16.5cm
Interchangeable base element for the Secabo TCC and TCC SMART cap press. With the base elements in different sizes, even particularly small or particularly large caps and hats can be processed perfectly in the press.
Base element for Secabo TCC and TCC SMART 10.2cm x 20.3cm
Interchangeable base element for the Secabo TCC and TCC SMART cap press. With the base elements in different sizes, even particularly small or particularly large caps and hats can be processed perfectly in the press.
Heating element for Secabo TM1, TM2 and TM5 60mm-75mm (A-grade)
Heating element for cups with a diameter of 60mm to 75mm. Suitable for the Secabo TM1, TM2 and TM5 Mug Press. Safety plug connector and hand screws for quick and easy changing of the heating sleeves. (A-Grade)
Heating element for TM1 and TM2 for conical cups (A-grade)
Heating element for conical cups with an upper diameter of approx. 90mm and a volume of approx. 350ml. Suitable for the Secabo TM1 and TM2 Mug Press. Safety plug connector and hand screws for quick and easy changing of the heating sleeves. (A-Grade)
Heating element for Secabo TM1, TM2 and TM5 75mm-90mm (A-grade)
Heating element for cups with a diameter of 75mm to 90mm. Suitable for the Secabo TM1, TM2 and TM5 Mug Press. Safety plug connector and hand screws for quick and easy changing of the heating sleeves. (A-Grade)
Heating element for Secabo TM2 for 2 cups, 7.5 - 9.0cm Grade A
Heating element for two cups with a capacity of 325ml each. Suitable for the Secabo TM2 Mug Press. Safety plug connector and hand screws for quick and easy changing of the heating sleeves. Total width of the heating element: 220-230mm.
Heating element for Secabo TM2 for conical shot glasses, 3.5/5cm - 4.5/6cm
Heating element for very small conical cups with a capacity of 40ml. Suitable for the Secabo TM2 Mug Press. Safety plug connector and hand screws for quick and easy changing of the heating sleeves.
Heating element for Secabo TM2 for espresso cups, 4.5cm - 5.5cm
Heating element for small cups with a capacity of 70ml. Suitable for the Secabo TM2 Mug Press. Safety plug connector and hand screws for quick and easy replacement of the heating sleeves.
Heating element for TM2 for large conical cups (A-grade)
Heating element for large conical cups with a capacity of 500ml. Suitable for the Secabo TM2 Mug Press. Safety plug connector and hand screws for quick and easy changing of the heating sleeves.
Silicone mat 30cm x 40cm
Heat-resistant silicone mat for levelling out uneven areas (e.g. on tiles) or for protecting sensitive materials when using a Heat Press, 30cm x 40cm, thickness 1mm
Silicone mat 40cm x 40cm
Heat-resistant silicone mat for levelling out uneven areas (e.g. on tiles) or for protecting sensitive materials when using a Heat Press, 40cm x 40cm, thickness 1mm
Silicone mat 40cm x 50cm
Heat-resistant silicone mat for levelling out uneven areas (e.g. on tiles) or for protecting sensitive materials when using a Heat Press, 40cm x 50cm, thickness 1mm
