Cross laser for precise alignment

This modular product has the following contents:1 × Secabo Crosslaser Basic Unit1 × Secabo Stand Basic Unit1 × Secabo 500mm Rod1 × Secabo Screws Bag for Transfer Extension Modules Do you know how easy it is to use the new Secabo cross laser? For example, the single cross laser table version.Connect the base piece to the desired rod, available in 500mm or 300mm, of course you can vary the height that suits you. Then clip on the laser diode and tighten it. You can secure everything with the supplied cable ties so that nothing gets in the way and you're ready to go!The great thing about the Secabo cross laser system is that you can now order additional poles if you need more height, or even an intermediate pole for a second laser. All products in the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

This modular product has the following contents:2 × Secabo Crosslaser Basic Unit2 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Fixed Joint Unit1 × Secabo Screws Bag for Transfer Extension Modules Do you know how easy it is to use the new Secabo cross laser? The double cross laser table version, here we have the option of simply attaching a second laser basic unit via a crossbar to achieve even more precision. With the 500mm long rod you can reach a larger area so that you can laser your textile e.g. on the chest and the edge. Here, of course, it helps to use a second laser and reduce the amount of work involved. Great thing, isn't it? And if you don't want to place the whole thing on your work table but somewhere else, you can of course also build a stand version with 2 additional 500mm or 300mm rods so that the laser system can also be conveniently placed somewhere else.The decision is of course yours, we make it possible! All products from the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

This modular product has the following contents:1 × Secabo Crosslaser Basic Unit3 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Screws Bag for Transfer Extension ModulesDo you know how easy it is to use the new Secabo cross laser? If you don't want to place the whole thing on your workbench but somewhere else, you can of course also build a stand version with 3 additional 500mm or 300mm rods so that the laser system can also be conveniently placed somewhere else.The decision is of course up to you, we make it possible! All products in the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

This modular product has the following contents:2 × Secabo Crosslaser Basic Unit4 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Screws Bag for Transfer Extension ModulesDo you know how easy it is to use the new Secabo cross laser? If you don't want to place the whole thing on your workbench but somewhere else, you can of course also build a stand version with 3 additional 500mm or 300mm rods so that the laser system can also be conveniently placed somewhere else. The double cross laser stand version, here you have the option of simply attaching a second laser basic unit via a crossbar to achieve even more precision. With the 500mm long rod, you can reach a larger area so that you can e.g. on the chest and the edge. Here, of course, it helps to use a second laser and reduce the amount of work involved. The decision is of course up to you, we make it possible!All products from the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

This modular product has the following contents:1 × Secabo Crosslaser Basic Unit1 × Secabo Accessory Holder1 × Secabo 500mm Rod1 × Secabo Screws Bag for Transfer Extension Modules+ Quick-change system for the LITE and SMART series* *The Secabo quick coupler may vary depending on the press model and is not included in the scope of delivery! Do you know how easy it is to use the new Secabo cross laser? For example, the single cross laser that you can attach directly to your Heat Press!With the Secabo Accessory Holder - it can be easily attached to our quick-change systemand then you have the fantastic option of attaching your laser to it.Of course, this works with almost all Secabo Heat Presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7. All products from the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

This modular product has the following contents:2 × Secabo Crosslaser Basic Unit1 × Secabo Accessory Holder2 × Secabo 500mm Rod1 × Secabo Fixed Joint Unit1 × Secabo Screws Bag for Transfer Extension Modules + Quick-change system for the LITE and SMART series* *The Secabo quick coupler may vary depending on the press model and is not included in the scope of delivery! Do you know how easy it is to use the new Secabo cross laser? For example, the double cross laser that you can attach directly to your Heat Press!With the Secabo Accessory Holder - it can be easily attached to our quick-change systemand then you have the fantastic option of attaching your laser to it.Of course, this works with almost all Secabo Heat Presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7. With the double cross laser version, which is attached directly to the Heat Press, it is possible to simply attach a second Laser-Basic Unit via a crossbar to achieve even more precision. With the 500mm long bar you can reach a larger area, so that you can transfer your textile e.g. on the chest and the edge. Here, of course, it helps to use a second laser and reduce the amount of work involved. The decision is of course up to you, we make it possible!All products from the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

This modular product has the following contents:2 × Secabo Crosslaser Basic Unit1 × Secabo Accessory Holder2 × Secabo 500mm Rod1 x Secabo Fixed Joint Unit1 x Storage Tray 1 × Secabo Screws Bag for Transfer Extension Modules + Quick coupler system for the LITE and SMART series* *The Secabo quick coupler may vary depending on the press model and is not included in the scope of delivery! Do you know how easy it is to use the new Secabo cross laser? For example, the double cross laser that you can attach directly to your Heat Press!With the Secabo Accessory Holder - it can be easily attached to our quick-change systemand then you have the fantastic option of attaching your laser to it.Of course, this works with almost all Secabo Heat Presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7. With the double cross laser version, which is attached directly to the Heat Press, it is possible to simply attach a second Laser-Basic Unit via a crossbar to achieve even more precision. With the 500mm long bar you can reach a larger area, so that you can transfer your textile e.g. on the chest and the edge. Here, of course, it helps to use a second laser and reduce the amount of work involved. The decision is of course up to you, we make it possible!You can also easily attach the practical storage tray, the Secabo Storage Tray, to your Heat Press. Small tools such as cutters or scissors, as well as your transfers, can be stored here. This means that the most important items for your workflow are always ready to hand and organised. All products from the Secabo cross laser system can be expanded as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level

Secabo Crosslaser Basic Unit incl. power supply unit. With the flexible cross lasers from Secabo, textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. can be positioned easily and reproducibly.

Secabo cross laserModular accessory systemBase plate for the mounting rod

Secabo cross laser modular accessory systemAccessory holder for articulated rods or Abaleg module holderSecabo has of course developed another innovative new feature for you,that makes working with the cross laser even easier.The Secabo Accessory Holder - it can be easily attached to the Heat Press using the Secabo quick-change system.You then have the fantastic option of attaching your laser to it.Of course, this works with almost all Secabo Heat Presses, such as the Secabo Smart models of the TC7, TC5 or the Secabo TS7.You can also attach the new Secabo Storage Tray, also developed by Secabo, to keep your transfers neat and organised directly on the press.

Secabo Storage TrayYou can easily attach this practical storage tray to your Heat Press.Small tools such as cutters or scissors can be stored here, as can your transfers.This means that the most important items for your workflow are always ready to hand and organised.

Secabo cross laser Modular accessory systemMounting rod 300 mm long

Secabo cross laserModular accessory systemMounting rod 500 mm long

Secabo cross laserModular accessory systemJoint unit for fixing the mounting rodThis allows the mounting rod to be connected and fixed transversely to achieve optimum adjustment.to achieve optimum adjustment.

Secabo cross laserModular accessory systemSwivelling joint unitThis allows the Secabo Crosslaser Basic Unit to be easily attached to the mounting rod and adjusted to the desired angle simply by rotating it.desired angle simply by turning it.

Screw set for the mounting rods of the Secabo cross laser system