Accessories from Secabo - customised for the highest demands in textile finishing
Secabo offers an extensive range of accessories for Heat Presses, cutting plotters and Badge Making Machines. Our accessories are designed to optimise or supplement the functionality and efficiency of the main devices. Our accessories for presses include quick-change systems and slide extensions to customise your press flexibly and individually, as well as sublimation paper and other tools that make your work in advertising technology and textile finishing much easier.
40cm x 50cm silicone mat
Heat-resistant silicone mat for levelling out uneven areas (e.g. on tiles) or for protecting sensitive materials when using a Heat Press, 40cm x 50cm, thickness 1mm
40cm x 60cm silicone mat
Heat-resistant silicone mat for levelling out uneven areas (e.g. on tiles) or for protecting sensitive materials when using a Heat Press, 40cm x 60cm, thickness 1mm
Cover for base plate, 38cm x 38cm
Cover for a Heat Press base plate in 38cm x 38cm format. Heat-resistant up to 220°C. Protects the base plate from discolouration and damage. Cover is washable.
Cover for base plate, 40cm x 50cm
Cover for a Heat Press base plate in 40cm x 50cm format. Heat-resistant up to 220°C. Protects the base plate from discolouration and damage. Cover is washable.
28cm x 38cm heating plate protection, self-adhesive, with PTFE coating, antistatic
Self-adhesive glass fibre film with PTFE coating. As a replacement for damaged or worn non-stick coatings on Heat Presses, cut to size 28cm x 38cm, suitable for all common Heat Press models from Stahls, Secabo, etc. Thickness 150µm.
38cm x 38cm heating plate protection, self-adhesive, with PTFE coating, antistatic
Self-adhesive glass fibre film with PTFE coating. As a replacement for damaged or worn non-stick coatings on Heat Presses, cut to size 38cm x 38cm, suitable for all common Heat Press models, thickness 150µm.
40cm x 50cm heating plate protection, self-adhesive, with PTFE coating, antistatic
Self-adhesive glass fibre film with PTFE coating. As a replacement for damaged or worn non-stick coatings on Heat Presses, cut to size 40cm x 50cm, suitable for all common Heat Press models, thickness 150µm.
38cm x 50cm protective film for transfers made of PTFE (antistatic)
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 38cm x 50cm. Suitable for all common Heat Press models, thickness 70µm.
50cm x 60cm protective film for transfers made of PTFE (antistatic)
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 50cm x 60cm. Suitable for all common Heat Press models, thickness 70µm.
80cm x 100cm protective film for transfers made of PTFE (antistatic)
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 80cm x 100cm. Suitable for all common Heat Press models, thickness 70µm.
100cm x 120cm protective film for transfers made of PTFE (antistatic)
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 100cm x 120cm. Suitable for all common Heat Press models, thickness 70µm.
Silicone foam sheet 8cm x 12cm
Silicone foam support for the interchangeable plate 8cm x 2cm for Heat Presses, thickness 10mm.
Silicone foam sheet 15cm x 15cm
Silicone foam support for the exchangeable plate 15cm x 15cm for Heat Presses, thickness 10mm
Silicone foam sheet 12cm x 38cm
Silicone foam support for the interchangeable plate 12cm x 38cm for Heat Presses, thickness 10mm.
Silicone foam sheet 20cm x 30cm
Silicone rubber support for the 20cm x 30cm interchangeable plate for Heat Presses, thickness 10mm.
Silicone foam sheet 38cm x 38cm
Support for Heat Presses made of silicone foam board
Silicone foam sheet 40cm x 50cm
Support for Heat Presses made of silicone foam 40cm x50cm, thickness approx. 10mm.
Interchangeable plate for Secabo Heat Presses 12cmx38cm
Interchangeable plate for Secabo Heat Presses 12cmx38cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 20cmx30cm
Interchangeable plate for Secabo Heat Presses 20cmx30cm. Suitable for the TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7 models. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 15cmx15cm
Interchangeable plate for Secabo Heat Presses 15cmx15cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. When used without the quick-release system, the optional fastening set is required. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 8cmx12cm
Interchangeable plate for Secabo Heat Presses 8cmx12cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Mounting set for Secabo interchangeable plates
Fastening set for mounting a Secabo exchangeable plate directly on the base of a Secabo Heat Press. Not required when using a Secabo quick-change system.
Secabo Quick-Change Plate Holder for the TPD7
Depending on the Heat Press model, the quick-change system allows up to three interchangeable plates to be fitted side by side and swapped in a matter of seconds. Interchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate onto the quick-change system. The adapter’s special beam technology allows textiles to be pulled over the base plate with ease.Tip:To fit the smaller 38cm x 38cm base plates onto the Secabo TPD7, the following plates and adapters are required in addition to this quick-change system:Secabo base plate 38 x 38 cm, item no. 109.505.40Adapter for base plate and Secabo TC5, TS7 quick-change system, item no. 109.505.30
Secabo quick-change plate changer for TPD7 PREMIUM
With the Secabo quick-change system, up to three exchangeable plates can be mounted next to each other - depending on the Heat Press model - and exchanged in just a few seconds. Exchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler. The special beam technology of the adapter makes it easy to transfer textiles over the base plate.
