Exchangeable plates
Secabo exchangeable plates are interchangeable base plates in different sizes for Secabo Heat Presses. They can be mounted directly on the Heat Press or on a quick-change system. Membrane base plates in particular can be used to compensate for different heights in the transfer object by means of an inflated membrane on the plate.
All in all, the Secabo exchangeable plates are a clever solution for fully utilising the potential of Heat Presses, printing different types of textiles precisely and working more efficiently.
What are you looking for?
Silicone foam sheet 8cm x 12cm
€21.42*
Silicone foam support for the interchangeable plate 8cm x 2cm for Heat Presses, thickness 10mm.
Silicone foam sheet 15cm x 15cm
€23.80*
Silicone foam support for the exchangeable plate 15cm x 15cm for Heat Presses, thickness 10mm
Silicone foam sheet 12cm x 38cm
€28.56*
Silicone foam support for the interchangeable plate 12cm x 38cm for Heat Presses, thickness 10mm.
Silicone foam sheet 20cm x 30cm
€29.75*
Silicone rubber support for the 20cm x 30cm interchangeable plate for Heat Presses, thickness 10mm.
Silicone foam sheet 40cm x 50cm
€59.50*
Support for Heat Presses made of silicone foam 40cm x50cm, thickness approx. 10mm.
Interchangeable plate for Secabo Heat Presses 12cmx38cm
From
€122.09*
Interchangeable plate for Secabo Heat Presses 12cmx38cm. Suitable for the models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 20cmx30cm
From
€122.09*
Interchangeable plate for Secabo Heat Presses 20cmx30cm. Suitable for the TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7 models. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 15cmx15cm
From
€110.31*
Interchangeable plate for Secabo Heat Presses 15cmx15cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. When used without the quick-release system, the optional fastening set is required. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 8cmx12cm
From
€110.31*
Interchangeable plate for Secabo Heat Presses 8cmx12cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Mounting set for Secabo interchangeable plates
€11.90*
Fastening set for mounting a Secabo exchangeable plate directly on the base of a Secabo Heat Press. Not required when using a Secabo quick-change system.
Adapter for base plate and S.-W. Secabo TC7, TPD7 / TPD7 PREMIUM
€84.49*
Adapter to connect the original base plate of the TC7 and TPD7 / TPD7 PREMIUM Heat Presses with the matching quick-change system. For TC7 also suitable for the slide extension. With this adapter, the base plate can also be exchanged in seconds. The special beam technology allows textiles to be pulled over the base plate.
Secabo base plate 38cm x 38cm for SMART/LITE
€168.98*
Heat Press Base Plate with a working surface 38cm x 38cm for use with the Secabo Adapter for Base Plate and S.-W. Secabo SMART/LITEThe plate is intended as an additional base plate for e.g. a TC5 SMART/LITE or TC7 SMART/LITE Heat Press with corresponding slide extension.The matching adapter is not included in the scope of delivery and is available as an option: Art. No. 109.505.311
Base plate 40cm x 50cm for SMART/LITE
€183.26*
Heat Press base plate with a working surface 40cm x 50cm for use with the Secabo adapter for base plate and S.-W. Secabo TC SMART/LITE.The plate is intended as an additional base plate for a TC7 SMART/LITE Heat Press with slide extension, for example.The matching adapter is not included in the scope of delivery and is available as an option: Art. No. 109.505.311
Adapter for base plate and S.-W. Secabo TC5 SMART and TC7 SMART
€84.49*
Adapter to connect the original base plate of the TC5 SMART or TC7 SMART Heat Presses with the matching quick-change system. Also suitable for the slide extension. With this adapter, the base plate can also be exchanged in seconds as an interchangeable plate. The special beam technology allows textiles to be transferred over the base plate.
Membrane base plate 45cm x 45cm for TC5, TC5 SMART and TC5 LITE
€577.15*
The membrane base plates from Secabo open up many new possibilities for using your Secabo Heat Press - especially for transfer objects with large differences in height and unevenness. Many old and almost all new Heat Press models are suitable for retrofitting with the passive membrane base plates. The membrane can be easily inflated using a small blower ball. This allows the maximum equalisation height of the membrane for a transfer to be determined. The contact pressure is set as usual on the Heat Press, for example using a handwheel on the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, the pressure can be fine-tuned using the blower ball and a release valve. Secabo's membrane underplates not only allow you to read off the actual transfer pressure, but also to set it again and again in a reproducible manner. The membrane base plates for work surfaces of 38cm x 38cm and 40cm x 50cm. The membrane plates themselves have dimensions of 45cm x 45cm or 47cm x 57cm. They can be mounted directly on the bases of many Secabo Heat Presses and are also suitable for Secabo's well-known quick-change systems and slide extensions.
Membrane base plate 47cm x 57cm for TC7, TC7 SMART / LITE, TPD7 / TPD7 PREMIUM, TS7 swingaway / TS7 SMART
€603.33*
The membrane base plates from Secabo open up many new possibilities for using your Secabo Heat Press - especially for transfer objects with large differences in height and unevenness. Many old and almost all new Heat Press models are suitable for retrofitting with the passive membrane base plates. The membrane can be easily inflated using a small blower ball. This allows the maximum equalisation height of the membrane for a transfer to be determined. The contact pressure is set as usual on the Heat Press, for example using a handwheel on the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, the pressure can be fine-tuned using the blower ball and a release valve. Secabo's membrane underplates not only allow you to read off the actual transfer pressure, but also to set it again and again in a reproducible manner. The membrane base plates for work surfaces of 38cm x 38cm and 40cm x 50cm. The membrane plates themselves have dimensions of 45cm x 45cm or 47cm x 57cm. They can be mounted directly on the bases of many Secabo Heat Presses and are also suitable for Secabo's well-known quick-change systems and slide extensions.
Secabo TB7 Thermobase 40cm x 50cm
€660.45*
With the Thermobase TB7, Secabo offers a heated base plate as an extension for your 40cm x 50cm models from Secabo, such as TC7 SMART, TS7 SMART, TPD7 and TPD7 PREMIUM, as well as for many older models. With the new TB7, the heat in a Heat Press not only comes from above, but also from below. This enables lower overall transfer temperatures, shorter transfer times and reduces marks on the textiles. In addition, the temperature can be reduced by the second heating plate, which in turn protects the fabric. The heatable lower plate is particularly recommended for delicate textiles. White toner transfers and sublimation transfers are also much more reliable, reproducible and of a higher quality with a base plate with fixed heat! The temperature of the TB7 is regulated by its own Secabo controller. The thermobase is softly padded, but can also be fitted with a hard or extra soft mat depending on the application. A protective cover is also included in the scope of delivery. The TB7 thermobase is easy to fit, even on Secabo quick-release systems.
Set of 4 Secabo removable discs
€393.89*
4 plates for the price of 3 - Set consisting of four interchangeable plates for Secabo Heat Presses for the price of three. The set includes the plates in the sizes 12cm x 38cm, 15cm x 15cm, 20cm x 30 cm and 8cm x 12cm.Suitable for the current Secabo models, e.g. TC5 LITE/SMART, TC7 LITE/SMART, TS5 LITE, TS7 LITE, TPS7 SMART SMART, TD7 LITE, TPD7, TPD7 SMART x Laser, TPD7 Premium and all press models in the Energy Saver version. A corresponding quick coupler is always recommended.