Accessories for Heat Presses
Heat Presses can be perfectly complemented and expanded with our accessories. For flexible adaptation to different transfer objects, Secabo offers exchangeable plates and quick-change systems that make it easier to replace plates. There are also various heating elements for Mug Presses, cap elements and individual modules. To protect the heating plates and textiles, we offer various protective films and covers. With our cross lasers, you can precisely position your transfer objects on the base plate of the press.
Cover for base plate, 40cm x 50cm
Cover for a Heat Press base plate in 40cm x 50cm format. Heat-resistant up to 220°C. Protects the base plate from discolouration and damage. Cover is washable.
Antistatic heating plate protection, self-adhesive, with PTFE coating 28 x 38 cm
Self-adhesive glass fibre film with PTFE coating. As a replacement for damaged or worn non-stick coatings on Heat Presses, cut to size 28cm x 38cm, suitable for all common Heat Press models from Stahls, Secabo, etc. Thickness 150µm.
Antistatic heating plate protection, self-adhesive, with PTFE coating 38 x 38 cm
Self-adhesive glass fibre film with PTFE coating. As a replacement for damaged or worn non-stick coatings on Heat Presses, cut to size 38cm x 38cm, suitable for all common Heat Press models, thickness 150µm.
Antistatic heating plate protection, self-adhesive, with PTFE coating 40 x 50cm
Self-adhesive glass fibre film with PTFE coating. As a replacement for damaged or worn non-stick coatings on Heat Presses, cut to size 40cm x 50cm, suitable for all common Heat Press models, thickness 150µm.
Antistatic protective film for PTFE transfers, 38cm x 50cm
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 38cm x 50cm. Suitable for all common Heat Press models, thickness 70µm.
Antistatic protective film for PTFE transfers, 50cm x 60cm
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 50cm x 60cm. Suitable for all common Heat Press models, thickness 70µm.
Antistatic protective film for PTFE transfers, 80cm x 100cm
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 80cm x 100cm. Suitable for all common Heat Press models, thickness 70µm.
Antistatic protective film for PTFE transfers, 100cm x 120cm
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or for re-pressing in Heat Presses. Cut to size 100cm x 120cm. Suitable for all common Heat Press models, thickness 70µm.
Silicone foam sheet 8cm x 12cm
Silicone foam support for the interchangeable plate 8cm x 2cm for Heat Presses, thickness 10mm.
Silicone foam sheet 15cm x 15cm
Silicone foam support for the exchangeable plate 15cm x 15cm for Heat Presses, thickness 10mm
Silicone foam sheet 12cm x 38cm
Silicone foam support for the interchangeable plate 12cm x 38cm for Heat Presses, thickness 10mm.
Silicone foam sheet 20cm x 30cm
Silicone rubber support for the 20cm x 30cm interchangeable plate for Heat Presses, thickness 10mm.
Silicone foam sheet 38cm x 38cm
Support for Heat Presses made of silicone foam board
Silicone foam sheet 40cm x 50cm
Support for Heat Presses made of silicone foam 40cm x50cm, thickness approx. 10mm.
Interchangeable plate for Secabo Heat Presses 12cmx38cm
Interchangeable plate for Secabo Heat Presses 12cmx38cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 20cmx30cm
Interchangeable plate for Secabo Heat Presses 20cmx30cm. Suitable for the TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7 models. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 15cmx15cm
Interchangeable plate for Secabo Heat Presses 15cmx15cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. When used without the quick-release system, the optional fastening set is required. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 8cmx12cm
Interchangeable plate for Secabo Heat Presses 8cmx12cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Mounting set for Secabo interchangeable plates
Fastening set for mounting a Secabo exchangeable plate directly on the base of a Secabo Heat Press. Not required when using a Secabo quick-change system.
Secabo quick-change plate changer for TPD7
With the quick-change system, up to three interchangeable plates can be mounted next to each other - depending on the Heat Press model - and exchanged in just a few seconds. Interchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler. The special beam technology of the adapter makes it easy to transfer textiles over the base plate.Tip:To mount the smaller base plates of 38cm x 38cm on the Secabo TPD7, the following plates and adapters are required in addition to this quick coupler:Secabo base plate 38x38cm, art. no. 109.505.40Adapter for base plate and S.W. Secabo TC5, TS7, Art.No. 109.505.30
Secabo quick-change plate changer for TPD7 PREMIUM
With the Secabo quick-change system, up to three exchangeable plates can be mounted next to each other - depending on the Heat Press model - and exchanged in just a few seconds. Exchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler. The special beam technology of the adapter makes it easy to transfer textiles over the base plate.
Adapter for base plate and S.-W. Secabo TC7, TPD7 / TPD7 PREMIUM
Adapter to connect the original base plate of the TC7 and TPD7 / TPD7 PREMIUM Heat Presses with the matching quick-change system. For TC7 also suitable for the slide extension. With this adapter, the base plate can also be exchanged in seconds. The special beam technology allows textiles to be pulled over the base plate.
Secabo base plate 38cm x 38cm for SMART/LITE
Heat Press Base Plate with a working surface 38cm x 38cm for use with the Secabo Adapter for Base Plate and S.-W. Secabo SMART/LITEThe plate is intended as an additional base plate for e.g. a TC5 SMART/LITE or TC7 SMART/LITE Heat Press with corresponding slide extension.The matching adapter is not included in the scope of delivery and is available as an option: Art. No. 109.505.311
Base plate 40cm x 50cm for SMART/LITE
Heat Press base plate with a working surface 40cm x 50cm for use with the Secabo adapter for base plate and S.-W. Secabo TC SMART/LITE.The plate is intended as an additional base plate for a TC7 SMART/LITE Heat Press with slide extension, for example.The matching adapter is not included in the scope of delivery and is available as an option: Art. No. 109.505.311