Secabo machines - Professional technology for textile finishing, advertising technology and creative productions
Secabo machines have stood for high quality, precision and reliability in textile finishing and advertising technology for years. Heat Presses, cutting plotters or Badge Making Machines - Secabo provides professionals and beginners with powerful tools to create customised products efficiently and to a high standard.
Our devices are used wherever precise processing, flexible applications and durable technology are required - e.g. in T-shirt printing, film labelling, advertising material production or sublimation printing.
Silicone foam sheet 15cm x 15cm
Silicone foam support for the exchangeable plate 15cm x 15cm for Heat Presses, thickness 10mm
Silicone foam sheet 12cm x 38cm
Silicone foam support for the interchangeable plate 12cm x 38cm for Heat Presses, thickness 10mm.
Silicone foam sheet 20cm x 30cm
Silicone rubber support for the 20cm x 30cm interchangeable plate for Heat Presses, thickness 10mm.
Silicone foam sheet 38cm x 38cm
Support for Heat Presses made of silicone foam board
Silicone foam sheet 40cm x 50cm
Support for Heat Presses made of silicone foam 40cm x50cm, thickness approx. 10mm.
Interchangeable plate for Secabo Heat Presses 12cmx38cm
Interchangeable plate for Secabo Heat Presses 12cmx38cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 20cmx30cm
Interchangeable plate for Secabo Heat Presses 20cmx30cm. Suitable for the TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7 models. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 15cmx15cm
Interchangeable plate for Secabo Heat Presses 15cmx15cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. When used without the quick-release system, the optional fastening set is required. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Interchangeable plate for Secabo Heat Presses 8cmx12cm
Interchangeable plate for Secabo Heat Presses 8cmx12cm. Suitable for models TC5 / TC5 SMART, TC7 / TC7 SMART, TPD7, TPD7 PREMIUM and TS7. The optional fastening set is required for use without the quick-change system. TPD7, TPD7 PREMIUM and TS7 can only be mounted when used with a quick coupler. With a Secabo quick coupler, the interchangeable plates can be changed in seconds and allow objects to be pressed onto the smallest possible surface. This protects surfaces and other transfers.
Mounting set for Secabo interchangeable plates
Fastening set for mounting a Secabo exchangeable plate directly on the base of a Secabo Heat Press. Not required when using a Secabo quick-change system.
Secabo quick-change plate changer for TPD7
With the quick-change system, up to three interchangeable plates can be mounted next to each other - depending on the Heat Press model - and exchanged in just a few seconds. Interchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler. The special beam technology of the adapter makes it easy to transfer textiles over the base plate.Tip:To mount the smaller base plates of 38cm x 38cm on the Secabo TPD7, the following plates and adapters are required in addition to this quick coupler:Secabo base plate 38x38cm, art. no. 109.505.40Adapter for base plate and S.W. Secabo TC5, TS7, Art.No. 109.505.30
Secabo quick-change plate changer for TPD7 PREMIUM
With the Secabo quick-change system, up to three exchangeable plates can be mounted next to each other - depending on the Heat Press model - and exchanged in just a few seconds. Exchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler. The special beam technology of the adapter makes it easy to transfer textiles over the base plate.
Adapter for base plate and S.-W. Secabo TC7, TPD7 / TPD7 PREMIUM
Adapter to connect the original base plate of the TC7 and TPD7 / TPD7 PREMIUM Heat Presses with the matching quick-change system. For TC7 also suitable for the slide extension. With this adapter, the base plate can also be exchanged in seconds. The special beam technology allows textiles to be pulled over the base plate.
Secabo base plate 38cm x 38cm for SMART/LITE
Heat Press Base Plate with a working surface 38cm x 38cm for use with the Secabo Adapter for Base Plate and S.-W. Secabo SMART/LITEThe plate is intended as an additional base plate for e.g. a TC5 SMART/LITE or TC7 SMART/LITE Heat Press with corresponding slide extension.The matching adapter is not included in the scope of delivery and is available as an option: Art. No. 109.505.311
Base plate 40cm x 50cm for SMART/LITE
Heat Press base plate with a working surface 40cm x 50cm for use with the Secabo adapter for base plate and S.-W. Secabo TC SMART/LITE.The plate is intended as an additional base plate for a TC7 SMART/LITE Heat Press with slide extension, for example.The matching adapter is not included in the scope of delivery and is available as an option: Art. No. 109.505.311
Secabo quick-change plate changer for LITE and SMART series
With the Secabo quick-change system, up to three exchangeable plates can be mounted next to each other - depending on the Heat Press model - and exchanged in just a few seconds. Available for Heat Presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, The BEAST and THE BEAST White Toner, excluding Secabo TCC SMART. Interchangeable plates must be ordered separately. The scope of delivery includes an adapter for mounting the original base plate on the quick coupler. The special beam technology of the adapter allows textiles to be conveniently pulled over the base plate.
Secabo Slide extension for LITE and SMART series
The Secabo LITE and SMART series can now be converted into a convenient double-plate Heat Press with the Secabo Slide. The sturdy slide can be bolted to the Heat Press in just a few simple steps. The slide is based on Secabo's well-known quick-change system and can be moved to the left and right end positions with little effort using the handle. A beam adapter is included in the scope of delivery so that the original base plate of the Heat Press can continue to be used. All interchangeable plates in the range also fit on the Slide. These are available separately and can be fitted and removed in seconds. Available for Heat Presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, THE BEAST and THE BEAST White Toner, excluding Secabo TCC SMART.
Secabo Slide extension for LITE and SMART series incl. 38x38cm base plate with beam adapter
The Secabo LITE and SMART series can now be converted into a convenient double-plate Heat Press with the Secabo Slide. The sturdy slide can be bolted to the Heat Press in just a few simple steps. The slide is based on Secabo's well-known quick-change system and can be moved to the left and right end positions on the handle with little effort. The scope of delivery includes a 38x38cm base plate and two beam adapters so that the original base plates of the Heat Press can continue to be used. All interchangeable plates in the range also fit on the Slide. These are available separately and can be fitted and removed in seconds. Available for Heat Presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, THE BEAST and THE BEAST White Toner, excluding Secabo TCC SMART.
Secabo Slide extension for LITE and SMART series incl. 40x50cm base plate with beam adapter
The Secabo LITE and SMART series can now be converted into a convenient double-plate Heat Press with the Secabo Slide. The sturdy slide can be bolted to the Heat Press in just a few simple steps. The slide is based on Secabo's well-known quick-change system and can be moved to the left and right end positions with little effort using the handle. The scope of delivery includes a 40x50cm base plate and two beam adapters so that the original base plates of the Heat Press can continue to be used. All interchangeable plates in the range also fit on the Slide. These are available separately and can be fitted and removed in seconds. Available for Heat Presses TC5 LITE, TC7 LITE, TC5 SMART, TC7 SMART, TS7 SMART, THE BEAST and THE BEAST White Toner, excluding Secabo TCC SMART.
Adapter for base plate and S.-W. Secabo TC5 SMART and TC7 SMART
Adapter to connect the original base plate of the TC5 SMART or TC7 SMART Heat Presses with the matching quick-change system. Also suitable for the slide extension. With this adapter, the base plate can also be exchanged in seconds as an interchangeable plate. The special beam technology allows textiles to be transferred over the base plate.
Membrane base plate 45cm x 45cm for TC5, TC5 SMART and TC5 LITE
The membrane base plates from Secabo open up many new possibilities for using your Secabo Heat Press - especially for transfer objects with large differences in height and unevenness. Many old and almost all new Heat Press models are suitable for retrofitting with the passive membrane base plates. The membrane can be easily inflated using a small blower ball. This allows the maximum equalisation height of the membrane for a transfer to be determined. The contact pressure is set as usual on the Heat Press, for example using a handwheel on the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, the pressure can be fine-tuned using the blower ball and a release valve. Secabo's membrane underplates not only allow you to read off the actual transfer pressure, but also to set it again and again in a reproducible manner. The membrane base plates for work surfaces of 38cm x 38cm and 40cm x 50cm. The membrane plates themselves have dimensions of 45cm x 45cm or 47cm x 57cm. They can be mounted directly on the bases of many Secabo Heat Presses and are also suitable for Secabo's well-known quick-change systems and slide extensions.
Membrane base plate 47cm x 57cm for TC7, TC7 SMART / LITE, TPD7 / TPD7 PREMIUM, TS7 swingaway / TS7 SMART
The membrane base plates from Secabo open up many new possibilities for using your Secabo Heat Press - especially for transfer objects with large differences in height and unevenness. Many old and almost all new Heat Press models are suitable for retrofitting with the passive membrane base plates. The membrane can be easily inflated using a small blower ball. This allows the maximum equalisation height of the membrane for a transfer to be determined. The contact pressure is set as usual on the Heat Press, for example using a handwheel on the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, the pressure can be fine-tuned using the blower ball and a release valve. Secabo's membrane underplates not only allow you to read off the actual transfer pressure, but also to set it again and again in a reproducible manner. The membrane base plates for work surfaces of 38cm x 38cm and 40cm x 50cm. The membrane plates themselves have dimensions of 45cm x 45cm or 47cm x 57cm. They can be mounted directly on the bases of many Secabo Heat Presses and are also suitable for Secabo's well-known quick-change systems and slide extensions.
Secabo modular single cross laser table version with 500mm rod
This modular product has the following contents:1 × Secabo Crosslaser Basic Unit1 × Secabo Stand Basic Unit1 × Secabo 500mm Rod1 × Secabo Screws Bag for Transfer Extension Modules Do you know how easy it is to use the new Secabo cross laser? For example, the single cross laser table version.Connect the base piece to the desired rod, available in 500mm or 300mm, of course you can vary the height that suits you. Then clip on the laser diode and tighten it. You can secure everything with the supplied cable ties so that nothing gets in the way and you're ready to go!The great thing about the Secabo cross laser system is that you can now order additional poles if you need more height, or even an intermediate pole for a second laser. All products in the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level
Secabo modular double cross laser table version with 2 x 500mm rod
This modular product has the following contents:2 × Secabo Crosslaser Basic Unit2 × Secabo 500mm Rod1 × Secabo Stand Basic Unit1 × Secabo Fixed Joint Unit1 × Secabo Screws Bag for Transfer Extension Modules Do you know how easy it is to use the new Secabo cross laser? The double cross laser table version, here we have the option of simply attaching a second laser basic unit via a crossbar to achieve even more precision. With the 500mm long rod you can reach a larger area so that you can laser your textile e.g. on the chest and the edge. Here, of course, it helps to use a second laser and reduce the amount of work involved. Great thing, isn't it? And if you don't want to place the whole thing on your work table but somewhere else, you can of course also build a stand version with 2 additional 500mm or 300mm rods so that the laser system can also be conveniently placed somewhere else.The decision is of course yours, we make it possible! All products from the Secabo cross laser system can be extended as required. Secabo cross laser modular accessory system for Heat PressesFor even more flexibility and precision in heat transfer: a cross laser suitable for all Secabo Heat Presses! The new modular cross lasers from Secabo offer you unprecedented convenience in textile finishing. The Secabo cross laser system can help you, for example, to optimally position the desired transfer objects and achieve consistent results with higher print runs. Secabo's flexible cross lasers can be used to position textiles and other objects as well as transfer elements such as flex films, sublimation papers etc. easily and reproducibly. Secabo has developed a modular system that is suitable for almost all Secabo Heat Presses. Whether you want to use the table version, stand version or, in combination with our Accessory Holder, the laser directly on the Heat Press.Your options here are extremely variable, as the different bar lengths and crossbars allow you to customise everything to suit your workplace. The new laser can be focussed even more precisely, which is particularly interesting for heat transfers in series production, as it makes it much easier to position the transfer objects precisely in almost all Heat Press types. Like all Secabo products, these new products have been tested in accordance with current safety standards and come with a 24-month guarantee. Features All Heat Presses can be retrofitted with the cross laser systemModular design for an optimised workflowPrecise positioning thanks to exact laser focusTable-top and floor-standing versions available Safety instructions!Do not look into the laser beamDo not look directly into the reflection of the laser beamDo not use at eye level