Heat Presses from Secabo - the centrepiece of modern textile finishing

The ultimate upgrade in energy efficiency and transfer convenienceIncrease energy efficiency and revolutionise your operation with the Secabo TC7 LITE Energy Saver. Equipped with Secabo's ground-breaking Energy Saver HP5 heating plate, this Heat Press presents an unprecedented fusion of technology and sustainability.Optimum energy efficiency meets elite performance:The integrated HP5 ES heating plate impresses with its additional insulation, which significantly reduces standby energy consumption, and promises savings of up to 80%. When in action, this heating plate is designed to operate more than 30% more efficiently, which not only brings you remarkable energy savings, but also helps to minimise the environmental footprint of your operation.User-centred safety and ease of use:Thanks to the specially designed cover, your employees are protected from potential burns while further reducing energy consumption. Operating the heating plate without the cover is extremely easy. A handwheel allows you to precisely adjust the contact pressure so you can get started in no time.Maximum cost efficiency for your business:Imagine if you could save up to EUR 374 a year in energy costs just by using the Secabo TC7 LITE Energy Saver for an 8-hour working day and an electricity price of EUR 0.4/kWh. It is not only an impressive cost saving, but also a step towards a more environmentally friendly operation.The Secabo TC7 LITE Energy Saver represents the future of Heat Press technology. It combines first-class performance, energy efficiency and user-friendliness in one impressive package. It's time to take the next step and optimise your operation with Secabo's revolutionary technology. Discover the countless benefits and increase the efficiency and sustainability of your operation.Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore a longer appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode during inactivity save additional energy.Features:Heat Press opens automatically after the time has elapsedDigital controller for temperature and time Temperature (max. 250°C) and time can be set on the controller using arrow keysModular design, components can be easily exchangedUpgrade to the Secabo SMART version possible at any timeEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer methodsCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

The ultimate upgrade in energy efficiency and transfer convenienceIncrease energy efficiency and revolutionise your operation with the Secabo TC5 LITE Energy Saver. Equipped with Secabo's groundbreaking Energy Saver HP5 heating plate, this Heat Press presents an unprecedented fusion of technology and sustainability.Optimum energy efficiency meets elite performance:The integrated HP5 ES heating plate impresses with its additional insulation, which significantly reduces standby energy consumption, and promises savings of up to 80%. When in action, this heating plate is designed to operate more than 30% more efficiently, which not only brings you remarkable energy savings, but also helps to minimise the environmental footprint of your operation.User-centred safety and ease of use:Thanks to the specially designed cover, your employees are protected from potential burns while further reducing energy consumption. Operating the heating plate without the cover is extremely easy. A handwheel allows you to precisely adjust the contact pressure so you can get started in no time.Maximum cost efficiency for your business:Imagine you could save up to 374 EUR in energy costs annually just by using the Secabo TC5 LITE Energy Saver for an 8-hour working day and an electricity price of 0.4 EUR/kWh. It is not only an impressive cost saving, but also a step towards a more environmentally friendly operation.The Secabo TC5 LITE Energy Saver represents the future of Heat Press technology. It combines first-class performance, energy efficiency and ease of use in one impressive package. It's time to take the next step and optimise your operation with Secabo's revolutionary technology. Discover the countless benefits and increase the efficiency and sustainability of your operation.Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore a longer appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode during inactivity save additional energy.Features:Heat Press opens automatically after the time has elapsedDigital controller for temperature and time Temperature (max. 250°C) and time can be set on the controller using arrow keysModular design, components can be easily exchangedUpgrade to the Secabo SMART version possible at any timeEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer methodsCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

Top performance and high convenience with the Secabo LITE series - With this new development of the successful Secabo TC5 toggle press, Secabo is launching a lucrative modular system on the market that opens up a wide range of new possibilities for users. Added flexibility thanks to easily interchangeable components - in short, a basic product with great upgrade options. The new LITE models therefore have the advantage of being able to retrofit individual base plates or heating platens at low cost and easily replace components as required. The TC5 LITE Heat Press from Secabo is a modular, automatically opening toggle press. The user does not have to wait next to the press during transfers, but can carry out other activities. Once the set time has elapsed, the press opens automatically and announces this three seconds in advance with an acoustic signal. The pressing process can be interrupted at any time at the touch of a button - for example to pre-press textiles. The temperature and pressing time are conveniently preselected using a digital controller. The contact pressure is set using a large handwheel on the top of the heating plate. The TC5 LITE Heat Press, with a working surface of 38 cm x 38 cm, has an additional cover plate on the heating plate to protect the user from burns. The design of the TC5 LITE is fully modular; the control unit, heating plate, base plate and base frame can be removed and replaced in a few simple steps. This also allows the use of other heating plates, for example. The LITE Heat Presses offer everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, inkjet flex, etc. are of course possible. The Secabo TC5 LITE can be optionally equipped with interchangeable plates in various formats - including a membrane base plate, a quick-change system and a slide extension for use as a double plate press. You also have the option of upgrading the TC5 LITE to our Secabo TC-SMART series.

Best performance and high comfort with the Secabo LITE seriesThe Secabo TS5 LITE represents an innovative development in the field of swing-away Heat Presses, specially designed for modern textile finishing and transfer printing businesses. With this model, Secabo offers a cost-effective yet powerful alternative to the existing SMART line, ideal for start-ups and smaller businesses that want to invest in quality without compromising.The LITE Heat Presses offer everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, DTF transfers etc. are of course possible. The Secabo TS5 LITE can be optionally equipped with interchangeable plates in various formats - including a membrane base plate, a quick-change system and a slide extension for use as a double plate press.Intelligent display functions: With the digital controller for temperature and time, the desired settings can be made quickly and easily.State-of-the-art press design: The TS5 LITE impresses with its intelligent design and high-quality materials. The modular design makes it quick and easy to adapt to different requirements.A basic product with great upgrade options: The TS5 LITE can be optionally equipped with interchangeable plates, a membrane base plate, a quick-change system and a slide extension to function as a double plate press or be optimised for specific applications.The Secabo TS5 LITE Heat Press offers everything you need for efficient and high-quality textile transfers, allowing you to realise your creative visions with precision and convenience.Heat Press opens automatically after the time has elapsedDigital controller for temperature and timeTemperature and time can be set on the controller using arrow keysModular design, components can be easily exchangedEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

The new TPD7 Heat Press from Secabo is the perfect solution for large-format and extensive transfers with all common transfer processes in large print runs. This double-plate Heat Press works with compressed air, which ensures easy working with consistent and reproducible results. With a size of 40cm x 50cm each, the two work plates offer a particularly generous working area for conveniently aligning the transfer objects. Thanks to the vertical arrangement of the base plates, in contrast to the previous model, the exact positioning of the objects to be transferred is even easier. The convenient work surface on the exposed base plate increases the quality and precision of the transfers. The horizontally movable heating plate head can be easily aligned over the respective work plate, and the vertical contact pressure enables error-free transfer of a wide range of materials without offset effects.Special features of the TPD7 Heat Press:High heat output and heat capacity of the heating plate, good heat distributionEasily adjustable and reproducible pneumatic pressureExtensive range of accessories availableSafe working thanks to 2-hand operationSuitable for handling high order volumesPerfect press for DTF transfers and the DTF pressing processNote for exchangeable plates and adapters:Smaller interchangeable plates are available separately (8x12 cm, 12x38cm, 15x15cm, 20x30cm) and can only be mounted in combination with the Secabo interchangeable plate quick changer for TPD7 (art. no. 109.505.16)! For the optional Secabo base plate 38cm x 38cm (art. no. 109.505.40), the adapter for base plate and S.-W. Secabo TC5, TS7 (art. no. 109.505.30) is required in addition to the above-mentioned quick changer! If you also want to connect the original plate of the TPD7 to the quick coupler, you will need the adapter for base plate and S.-W. Secabo TC7, TPD7 (art. no. 109.505.31).

The professional device for high-end applications at the highest level - The TS7 SMART swingaway Heat Press from Secabo is THE professional device for textile finishing at the highest level and the first Heat Press from Secabo Made in Germany. The professional device has a modular design and thus provides you with an optimum basis for creating your own personal "workhorse". With its convenient automatic swing mechanism, the Secabo TS7 Heat Press offers a particularly large working area for easy alignment of the transfer objects. The generous base plate measuring 40cm x 50cm is arranged in portrait format, which makes it even easier to position the objects to be transferred precisely. Transfer objects with a height of up to 70mm are easy to handle thanks to the large adjustment range of the press head and can be pressed with a maximum contact pressure of up to 250g/cm2. Whether you want to press work trousers, gym bags or hoodies, the large adjustment range makes them completely flexible. With a swivelling angle of 110°, you can work in a comfortable working position. The TS7 SMART can be swivelled to the right or left, allowing the Heat Press to fit perfectly into almost any production environment. The automatic opening and automatic swinging open of the TS7 SMART swingaway Heat Press after the transfer process makes your work easier and ensures a smooth workflow. The Secabo TS7 Smart is suitable for all known heat transfer processes and can therefore be used in all areas of transfer technology. As you would expect from Secabo, the TS7 SMART is easy to operate, even for beginners. The device has a digital controller, where a temperature of up to 225 °C and a maximum pressing time of 999 seconds can be precisely preselected for the transfer. Like all products in Secabo's TC SMART series, the TS7 SMART has a Bluetooth interface which, together with the Secabo SMART Transfer app, offers complete instructions for multi-stage transfers and many other great features. The TS7 SMART Heat Press is available with the TB7 thermobase, quick-change systems, exchangeable plates and the slide extension as well as other accessories from Secabo.

The revolution in Heat Press technologyIntegrate sustainability and efficiency directly into your business with the new Secabo TC5 SMART Energy Saver. This advanced system combines cutting-edge technology with an energy-efficient platform to give you a first-class transfer experience.Energy saving redefined:The integrated Energy Saver HP5 heating plate is at the heart of this ground-breaking development. With additional insulation, this heating plate significantly reduces energy consumption in standby mode. And the specially developed cover not only ensures safety and protection against burns, but also further energy savings. It's not just a question of cost, but also of the environment, with potential savings of up to EUR 374 per year and a significantly reduced carbon footprint.Flexibility and adaptability:Thanks to its modular design and quick-change system, the TC5 SMART Energy Saver is ideal for companies that require adaptability and scalability. The Secabo TC5 SMART Energy Saver is more than just a Heat Press. It is a complete solution that combines energy efficiency, state-of-the-art technology and first-class performance. Discover the numerous benefits and possibilities to optimise your operation. Eco-Friendly Design:Conserve resources through sustainable design and minimised energy consumption to reduce your environmental footprint.Optimised energy management:Intelligent energy management ensures lower consumption and minimised heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and utilise potential savings.Longer service life:Reduced energy consumption ensures less wear and tear and therefore an extended appliance service life.Cost savings:The cost-effectiveness of energy savings contributes to faster amortisation of acquisition costs.Increased productivity:More efficient energy management enables longer operating times and therefore increases productivity.Reduced CO2 emissions:The use of energy-efficient technologies significantly reduces CO2 emissions, helping to protect the environment.Improved heat transfer:Optimised energy efficiency ensures more even and precise heat transfer in Heat Presses.Smart Energy features:Innovative technologies such as automatic switch-off and sleep mode during inactivity save additional energy.Features:Bluetooth interface for Secabo Smart Transfer app with its own transfer database and numerous additional featuresDigital controller for temperature, time, pre-pressing, counting function and many other features100% new design and new electronics incl. display and control conceptHeat Press opens automatically after the time has elapsedEasily adjustable contact pressureAdjustable force for opening and closing the pressHeating plate with additional protective plateModular design, compact dimensions, lightweight packagesSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.

With the C5 Clam, Secabo has the right Heat Press for getting started with textile finishing and other transfer techniques. All common heat transfer processes (flock, flex, sublimation, etc.) can be carried out with the Clam Press. The digital controller for temperature and time allows the required settings to be made quickly and easily. The pressure is adjusted using a handy handwheel. The Secabo C5 Clam has a work surface of 38cm x 38cm.Inexpensive Heat Press for beginnersLarge work surface of 38cm x 38cmDigital controller for temperature and timeEasily adjustable contact pressure

The TC1 Heat Press from Secabo has a working area of 15 x 15 cm. This makes it perfect for textile finishing, e.g. for emblems, patches, iron-on transfers, branding or product labelling. The TC1 is lightweight and very compact, making it ideal for mobile use at events. Our "little one" is also a favourable entry-level model. The TC1 masters transfers on areas that are difficult to access, it presses specifically where it is desired and necessary. Above all, this prevents resublimation and dye migration. The plate heats up quickly and has a low energy consumption. As you would expect from Secabo, the TC1 is easy to operate, even for beginners. The large opening angle makes it easy to prepare the transfer objects on the base plate. The time and temperature for the transfer can be precisely preselected on the digital controller. The contact pressure is set using the handwheel. Closing the pressing lever starts the pressing process.

With the TC2, Secabo has the right Heat Press for getting started in textile finishing and other transfer techniques. The time and temperature of the transfer can be preselected on the digital controller of the Secabo TC2. An acoustic signal sounds when the set time has elapsed. The contact pressure is set using a handwheel on the top of the heating plate. The pressing process is started by closing the pressing lever. The large opening angle allows convenient preparation of the transfer objects on the base plate. The TC2 has a working surface of 23cm x 33cm and a heating plate with a power consumption of 1,000W.

Secabo's new TC5 SMART Heat Press opens up innovative ways to achieve even better performance. This new development of the successful Secabo TC5 automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC5 SMART is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled while simultaneously accessing a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC5 SMART Heat Press offers a working area of 38 cm x 38 cm, is easy to operate and robust during operation. The modular design allows quick and easy installation of interchangeable plates in various formats, quick-change system and slide extension.

This new development of the successful Secabo TC5 MEMBRAN automatic toggle press brings a world first to the market, opening up a host of new possibilities for users: For the first time, the controller of the TC5 SMART MEMBRAN is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled with simultaneous access to a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC5 SMART MEMBRAN Heat Press offers a work surface of 38 cm x 38 cm, is easy to operate and robust during operation. The base plate of the Heat Press has a passive membrane. It opens up many new application possibilities - especially for transfer objects with large differences in height and unevenness. The membrane can be easily inflated using a small blower ball. This allows the user to determine the maximum levelling height of the membrane for a transfer. The contact pressure can be adjusted using a large handwheel at the top of the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, additional fine adjustment is possible via the blower ball and a release valve. With the TC5 SMART MEMBRAN, not only can the actual transfer pressure be read off, but it can also be set reproducibly time and time again. The modular design allows quick and easy installation of exchangeable plates in various formats, quick-change system and slide extension. A conventional base plate is included in the scope of delivery alongside the membrane plate.

Secabo's new TC7 SMART Heat Press opens up innovative ways to achieve even better performance. This new development of the successful Secabo TC7 automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC7 SMART is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled while simultaneously accessing a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC7 SMART Heat Press offers a working area of 40 cm x 50 cm, is easy to operate and robust during operation. The modular design allows quick and easy installation of interchangeable plates in various formats, quick-change system and slide extension.

This new development of the successful Secabo TC7 MEMBRAN automatic toggle press brings a world first to the market, opening up a wide range of new possibilities for users: For the first time, the controller of the TC7 SMART MEMBRAN is equipped with a Bluetooth interface which, with the free Secabo Smart Transfer app, allows the press to be controlled with simultaneous access to a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The new Secabo TC7 SMART MEMBRAN Heat Press offers a work surface of 40 cm x 50 cm, is easy to operate and robust during operation. The base plate of the Heat Press has a passive membrane. It opens up many new application possibilities - especially for transfer objects with large differences in height and unevenness. The membrane can be easily inflated using a small blower ball. This allows the user to determine the maximum levelling height of the membrane for a transfer. The contact pressure can be adjusted using a large handwheel at the top of the heating plate. When the Heat Press is closed, a pressure gauge reliably indicates the current contact pressure - in grams per square centimetre. During the pressing process, additional fine adjustment is possible via the blower ball and a release valve. With the TC7 SMART MEMBRAN, not only can the actual transfer pressure be read off, but it can also be repeatedly and reproducibly adjusted. The modular design allows quick and easy installation of exchangeable plates in various formats, quick-change system and slide extension. A conventional base plate is included in the scope of delivery alongside the membrane plate.

Best performance and high convenience with the Secabo LITE series - With this new development of the successful Secabo TC7 toggle press, Secabo is launching a lucrative modular system on the market that opens up a wide range of new possibilities for users. A plus in flexibility thanks to easily interchangeable components, in short a basic product with great upgrade options. The new LITE models therefore have the advantage of being able to retrofit individual base plates or heating platens at low cost and easily replace components as required. The TC7 LITE Heat Press from Secabo is a modular, automatically opening toggle press. The user does not have to wait next to the press during transfers, but can carry out other activities. Once the set time has elapsed, the press opens automatically and announces this three seconds in advance with an acoustic signal. The pressing process can be interrupted at any time at the touch of a button - for example to pre-press textiles. The temperature and pressing time are conveniently preselected using a digital controller. The contact pressure is set using a large handwheel on the top of the heating plate. The TC7 LITE Heat Press, with a working surface of 40cm x 50cm, has an additional cover plate on the heating plate to protect the user from burns. The design of the TC7 LITE is fully modular; the control unit, heating plate, base plate and base frame can be removed and replaced in a few simple steps. This also allows the use of other heating plates, for example. The LITE Heat Presses offer everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, inkjet flex, etc. are of course possible. The Secabo TC7 LITE can be optionally equipped with interchangeable plates in various formats - including a membrane base plate, a quick-change system and a slide extension for use as a double plate press. You also have the option of upgrading the TC7 LITE to our Secabo TC-SMART series.

The newly developed TP10 from Secabo is the ideal Heat Press for professional finishers of large-format objects in particular: With an extra large work surface of 80cm x 100cm, this heat press model can be used to carry out heat transfers on large-format substrates such as flags, bed linen or textile room dividers. The base plate acts as a drawer element, which makes it easy to arrange the transfer objects and can be handled with little effort despite its size. The contact pressure of the TP10 Heat Press is generated with compressed air, which means easy working with consistent and reproducible results. The pneumatic heating platen head allows for error-free transferring of a wide variety of materials without offset effects or similar due to the vertical contact pressure. The Secabo TP10 Heat Press with a heating capacity of 5.1 kW is suitable for all known heat transfer processes and can therefore be used in almost all areas of transfer technology.

The absolute professional device for high-end applications at the highest levelTHE BEAST from Secabo combines a newly developed smart Heat Press with a heated lower plate.TS7 SMART - the centrepiece of THE BEAST is the first Heat Press from Secabo "Made in Germany".THE BEAST enables high-end applications and gentle textile transfers.Thanks to its modular design, the newly developed Secabo TS7 SMART Heat Press in combination with the Thermobase TB7 can master even the most demanding textile finishing tasks. The combination product "THE BEAST" works quickly, is gentle on textiles and solves typical transfer problems.Textile finishing at the cutting edge The TS7 SMART swingaway heat press from Secabo brings textile finishing up to date: it is a high-performance, efficient press. It processes large prints with a working area of 40 x 50 cm and creates transfer objects up to seven centimetres high.The new TS7 SMART can also be controlled using the Secabo app. This has the most comprehensive database of transfer parameters currently available on the market: the user selects the fabric type and transfer medium and automatically receives the appropriate settings for temperature, time and pressure. Another major advantage of the Secabo app is the simple instructions for complex multi-stage transfer processes.New heating technology for transfers With the new Thermobase TB7, Secabo also offers a heated lower plate as an extension. This is particularly recommended for sensitive textiles. It also ensures reliable white toner transfers and sublimation transfers. When using the Thermobase, the heat also comes from below. This enables lower overall transfer temperatures, shorter transfer times and reduces marks on the textiles.As you would expect from Secabo, THE BEAST is easy to use, even for beginners. THE BEAST is compatible with quick-change systems, exchangeable plates and the slide extension as well as other Secabo accessories.Secabo Heat Press TS7 SMART:Bluetooth interface for Secabo SMART Transfer App with its own transfer database and numerous additional featuresDigital controller for temperature, time, pre-pressing, counting function and many other features with innovative operating conceptVery large swivelling angle 110°Suitable for transfer objects from 0 mm - 70 mm in heightMax. Contact pressure of 250g/cm² achievable with low manual forceLeft/right swivelling direction selectableCompatible with quick coupler and slideModular design, compatible with various heating and base platesSecabo Thermobase TB7 40cm x 50cm:The temperature of the TB7 is regulated with its own Secabo controllerHeated base plate as an extension for your 40cm x 50cm Secabo models, such as TC7 SMART, TS7 SMART, TPD7 and TPD7 PREMIUM.Particularly suitable for delicate textilesEasy to fit, also on quick coupler and slide extensionHeats up quickly to a temperature of 160 °CLow power consumptionFor retrofitting many old and almost all new Secabo Heat PressesSecabo quick-change plate changer for LITE and SMART seriesUp to three interchangeable plates can be mounted next to each other (interchangeable plates must be ordered separately)Exchangeable plates can be changed within a few secondsThe scope of delivery includes an adapter for mounting the original base plate on the quick coupler

With the new TCC SMART cap press, Secabo is opening up innovative paths and thus even better performance in the finishing of baseball caps, hats and similar products. The controller of the TCC SMART is equipped with a Bluetooth interface that allows the press to be controlled with the free Secabo SMART Transfer app while at the same time providing access to a comprehensive function database. For the user, this means: simply enter the fabric type and transfer material and the appropriate combinations for temperature, time and pressure can be called up. Additional functions such as the calculation of heat-up times and warning functions make the app a valuable aid for all common heat transfer processes. The contact pressure of the new Secabo TCC SMART heat press for caps is set using a handwheel on the underside of the easily interchangeable base elements, and a fitted cap is clamped from below using a clamp. The automatically opening TCC SMART has a large opening angle and a button for manual opening before the set time has elapsed. It is suitable for the professional use of all common heat transfer processes such as flock foils, flex foils, sublimation, transfer, inkjet flex, etc.

The TM1 Mug Press from Secabo is ideal for conveniently carrying out sublimation transfers on ceramic mugs and similar objects. The Secabo TM1 Heat Press is suitable for both beginners and professional users and is quick and safe to operate thanks to its digital controller. The contact pressure can be easily adjusted using a handwheel. Three different heating elements are optionally available - also in a conical design. The Secabo TM1 Mug Press is supplied with a heating sleeve for cups with a diameter of 75-90 mm (heating elements are wearing parts). We also recommend only switching on the Mug Press for actual use and not heating it continuously.

The TM2 Mug Press from Secabo has an extra-wide heating element that allows you to print 2 mugs at the same time - or a jug or large mug up to 21 cm high. Whether you are a beginner or a professional - with the TM2, sublimation transfers on ceramic cups and similar objects are particularly efficient. The digital controller controls the temperature and time precisely and reliably. The contact pressure can be easily adjusted using a handwheel. The device is supplied with a sleeve for 325 ml cups. Six additional heating elements in various sizes are optionally available, including for conical cups. Our recommendation: Only switch on the Heat Press for actual use, as this protects the heating element and saves energy.

With the TM5 Mug Press from Secabo, orders can be processed faster. It can carry out transfers on up to 5 cups simultaneously, thanks to 5 separately controllable heating elements. This makes the TM5 ideal for efficient sublimation transfers on ceramic cups and similar objects, especially for larger print runs or higher throughput. The digital controllers control the temperature and time of the heating elements precisely and reliably. The contact pressure can be easily adjusted using a handwheel. The appliance is supplied with 5 cuffs for 325 ml cups, with an additional spare cuff included free of charge. An additional heating element for small cups is available as an option. Our recommendation: Only switch on the individual heating elements for actual use, as this protects the heating elements and saves energy.

Play in the premier league with the new ball press from Secabo - With the new TCB SMART ball press, Secabo is opening up innovative ways to achieve even better ball finishing performance. This Heat Press enables you to finish most inflatable sports balls, including artificial leather footballs, handballs and basketballs, in just a few simple steps. Even a football can be customised with a logo, player name or number using the Secabo TCB Smart Ball Press. Personalised souvenirs and prizes for events or give-aways can be produced with single or multi-coloured transfers. All balls can be pressed at the same temperature of 113 °C for 8 seconds. The low temperature is important to avoid damaging sensitive plastics or artificial leather. We recommend a transfer size of up to 5 cm x 8 cm so that the foil lies smoothly on the curved surface of the ball. The contact pressure of the new TCB SMART Heat Press for balls from Secabo is adjusted on the underside by pressing the cylinder downwards and adjusting it with the two screws on the left and right. The specially shaped heating plate fits almost all ball sizes and shapes. The adjustable cylinder ensures that the pressure can be adjusted as precisely as possible to the ball size. The automatically opening ball press has a large opening angle and a button for manual opening before the set time has elapsed. It is suitable for the professional use of all common heat transfer processes such as flock foils, flex foils, sublimation, transfer, inkjet flex, etc. The ball press has a digital temperature and time display. Additional functions such as the calculation of heat-up times and warning functions, in combination with the Secabo app, make this a valuable aid for all common heat transfer processes.

The TS5 Economy combines the best of two Secabo bestsellersWith its swing mechanism, the TS5 Economy is particularly convenient to operate and transfer objects can be easily aligned. The crank handle regulates the contact pressure quickly and conveniently and the parallel closing base plate and heating plate mean that even thicker transfer objects such as hoodies can be pressed without any problems. The compactness and ease of use have been adopted from its sister model in the TC series, the TC5 Lite. The compact size of 38 cm x 38 cm makes the TS5 Economy space-saving and transportable - and therefore the ideal press for sports and cultural events or festivals. The control concept is deliberately kept simple to enable effective handling and to ensure intuitive operation even for beginners. The TS5 Economy is the perfect, compact basic product that can be expanded as required thanks to its modularity. If required, base or heating plates can be retrofitted at low cost and components can be easily exchanged, offering both beginners and professionals the flexibility they need.The TC5 Economy Heat Press offers everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, inkjet flex, etc. are of course possible.

Best performance and high comfort with the Secabo LITE seriesThe Secabo TS7 LITE marks an innovative milestone in the development of swing-away Heat Presses. As part of the new LITE series from Secabo, the TS7 LITE offers a cost-effective, high-performance solution for demanding textile finishing and transfer printing projects. With a working area of 40cm x 50cm, it is ideal for larger designs and enables efficient production at the highest quality.The LITE Heat Presses offer everything that makes textile transfers with Secabo so convenient. All professional applications of common heat transfer processes such as flock foils, flex foils, sublimation, DTF transfers, etc. are of course possible. The Secabo TS7 LITE can be optionally equipped with exchangeable plates in various formats - including a membrane base plate, a quick-change system and a slide extension for use as a double plate press.Intelligent display functions: Simple and quick setting of temperature and time via the digital controller.State-of-the-art press design: The TS7 LITE impresses with its intelligent design and the use of high-quality materials. Its modular design enables quick and easy adaptation to different requirements.A basic product with extensive upgrade options: The TS7 LITE offers numerous customisation and upgrade options to create your ideal work tool. From retrofitting with a passive membrane base plate to integrating the Secabo TB7 Thermobase for even more precise transfers - the TS7 LITE adapts to your needs.The Secabo TS7 LITE Heat Press represents a new generation of heat presses that enable efficiency, flexibility and the highest quality in textile finishing. Discover the diverse possibilities of the TS7 Lite and set new standards in your production.Heat Press opens automatically after the time has elapsedDigital controller for temperature and time Temperature and time can be set on the controller using arrow keysModular design, components can be easily exchangedEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even greater productivity.